enfrdeitptrues

Vinyl banner planter

canvas planters backgroundStep by step project on how to make your own used vinyl planter

A straight forward sewing project on how to make your own vinyl pot planters from scrap vinyl and without using a tape measure. These planters are durable and long lasting and can transform any boring plastic pot into a trendy planter if you do not want to plant directly into the bag.

the source material that we have used in this project was from a pull up banner that you see many corporate use for advertising in indoor areas and events. you can also use the banner that they use for the massive adverts that we all see on the side of the road.

The basic composition of PVC (Polly vinyl chloride) makes these planters exceptionally durable and resistant to dirt, waster and UV if you deiced to use them outside. 

A lot of people plant directly into the bag but you can also use the bad as a liner that can go over any exiting plastic pots you may have. 

Another option is to make the bag the same size as a 2l cold drink bottle and then use the bottle as the planter and then the vinyl as a external cover. 

A final option is to make the bag the size of the 2l bottle so that you can cut the top of the bottle off and invert it over the seedling that you have in your planter as that it acts as a terrarium and help the baby plant in the early stages to stay mist.

 What you will need

  • Recycled canvas billboard banner
  • Scissors
  • Ruler
  • Sewing machine
  • Marking pen

TIP: You need to use the billboard banners that are made with a plastic backing, this helps the pot plant to remain waterproof, to keep all the soil in and it will last much longer if it's made from a plastic one. You May use a fabric one but it won't last as long as the plastic version.
picture of the requierments for making your own canvas pot planters

Step 1

Decide what size you want your pot plant to be, I'm going to be using 2 bits of off cuts from a project I've done previously to this, so I already have two pieces of canvas. The one is 40 cm long by 18 cm in height; this will be the sides of the recycled pot plant holder. We also need another piece for the base but we can determine its size once we have done the sides of the planter.
Start by folding the 40 cm by 18cm bit of canvas in half.
picture of the strip of scrap vinyl folded in half

Step 2

Sew the banner in half with a tacking stitch from the top to bottom this will keep it in place; this is not your secure stitch it's just a temporary holding stitch.
canvas banner been sewn along the edge with tacking stich

Step 3

Open up your sewn together canvas which is now a circle and turn the entire thing inside out. This is not easy to do because the plastic sticks on itself but with a little bit of effort it can be done.
inverted canvas circle

Step 4

Try shaping your circle to be as round as possible by placing one hand inside the circle and work around the circumference. We are now going to place this circle onto our other piece of canvas and using a marking pen we are going to trace around the outside of the circle onto the canvas that we have placed as the base.
marking the circle

Step 5

Cut out the circle, it doesn't have to be perfectly round, as long the general shape is there.
cut out circle canvas

Step 6

Using a quick unpick or scissors undo the tack stitching that we did when we folded the canvas in half. If we are going to make more than one pot plant holder you don’t have to do the first step as you will already know the size of your base.

Place your circle on top of your long 40 cm high strip and adjust it so that both edges meet. Make sure that the correct side of the canvas is facing inwards so that when you turn it inside out your design is facing outwards.
Place this under your sewing foot 5mm from the edge.
place circle on edge of long strip

Step 7

As you sew you are going to slowly turn the circle so that the circle always stays next to the edge of the bottom canvas. It can get a little bit difficult towards the end because you start running out of space and you need to be turning your circle and keeping everything together.You need to manoeuvre it a little bit and wiggle around and trying to keep your sewing machine foot just at 5 millimeters away from the edge.
sew the base and side together

Step 8

We now sew the sides back together with a stronger stitch and remember to back stitch at the top and bottom of the wall, this is for added strength.
sewn edges

Step 9

Turn the planter inside out, this is not very easy to do because the plastic is very sticky and the smaller your project is the harder it will be, but with a bit of effort and hard work you’ll manage, you may need a pair of pliers or something to help pull it through.
turn planter inside out

 

Step 10

Open up the seam and try press it flat,
open up seam

Take the top edge of the canvas and fold it inwards about halfway to get a more rigid pot plant holder, you also get a much nicer finish because you don't see your sewing edges and it is now a stronger and much more sturdier billboard planter.
fold over half waystrong billboard canvas planter

Step 11

All that remains now is to choose a nice little plant, add some potting soil, plant your plant and you have an awesome pot plant. Pic planting in canvas billboard banner

Don’t forget to water your plant.

Tip:
You can use a spritzer bottle to water the plant and its is also helpful to remove dirt from the planter. What's great about this recycle billboard planter is they last a very long time and are very easy to keep clean aside for the obvious aspect of saving the planet!!!

Copyright (c) Upcycle 2010. All rights reserved.